Skip to main content
Civil & Geotechnical EngineeringPublished 2026-05-0216 min read

Lateral Earth Pressure on Retaining Walls: Rankine vs. Coulomb Methods per AASHTO LRFD

A rigorous geotechnical and structural engineering guide to lateral earth pressure calculations and retaining wall stability analysis under AASHTO LRFD Bridge Design Specifications (10th Edition, 2024 with September 2025 Errata). Contrasts classical Rankine and Coulomb theories, evaluates active and passive coefficients, incorporates uniform surcharge and hydrostatic groundwater pressures, and solves an end-to-end cantilever retaining wall benchmark with verified sliding, overturning, and middle-third eccentricity checks.

Author: Md. Nur Islam•Founder of EngiVanta

Retaining walls, bridge abutments, basement walls, and earth-retaining systems must safely support massive lateral horizontal pressures generated by retained backfill soil, surface vehicular surcharges, and potential groundwater accumulations. Sizing these structures requires determining the magnitude, point of application, and direction of lateral earth pressures acting along the vertical or battered stem.

In geotechnical engineering, two classical limit-equilibrium theories dominate earth pressure design: Leonhard Euler and William Rankine’s 1857 conjugate stress state theory, and Charles-Augustin de Coulomb’s 1776 sliding soil wedge theory. While Rankine assumes an idealized frictionless vertical wall with soil in a planar plastic equilibrium state, Coulomb accounts for real-world interface friction between the backfill soil and the concrete wall stem, yielding an inclined lateral force that provides stabilizing vertical friction resistance.

Under modern infrastructure design specifications—specifically the AASHTO LRFD Bridge Design Specifications (10th Edition, 2024, incorporating the September 2025 Errata)—lateral earth pressures dictate both the structural reinforcement of the wall stem and the external stability of the foundation against sliding, overturning, and excessive base eccentricity. This guide details the governing physics of earth pressures, compares Rankine and Coulomb formulations, and works through a full-scale retaining wall design benchmark.

1. The Three Fundamental Lateral Earth Pressure States

The magnitude of lateral earth pressure exerted by a soil mass depends directly on the magnitude and direction of wall displacement (wall yield):

• At-Rest Lateral Earth Pressure (K_0): Exists when the retaining structure is completely unyielding and rigid (zero lateral wall deflection, Delta_x = 0), such as basement walls restrained by rigid floor diaphragms or bridge abutments founded on massive rock formations. For normally consolidated cohesionless soils, Jacky empirical equation governs: K_0 = 1 - sin(phi).

• Active Lateral Earth Pressure (K_a): Develops when the retaining wall tilts or translates outward away from the retained backfill. As the soil expands laterally, internal shear resistance mobilizes along an inclined slip plane, causing the lateral thrust to decrease to a minimum limit-equilibrium value. In granular soils, full active state requires minimal outward crest deflection of only 0.001H to 0.004H.

• Passive Lateral Earth Pressure (K_p): Develops when the wall is pushed laterally into the retained soil mass (such as in front of an embedded footing toe or shear key). The soil is compressed horizontally until ultimate shear resistance mobilizes, reaching a maximum lateral resistance. Mobilizing full passive resistance requires significantly larger displacement (0.01H to 0.05H).

2. Mathematical Formulations: Rankine vs. Coulomb Active Coefficients

Engineers must select between Rankine and Coulomb theories based on structural connection conditions, wall batter, and backfill slope angles:

Rankine Active Earth Pressure Formulation

Rankine theory assumes a homogeneous, semi-infinite soil mass, a smooth (frictionless) vertical wall back face (delta = 0), and a planar ground surface. For a vertical wall (theta = 0) retaining a horizontal backfill (beta = 0):

K_a = tan²(45° - phi / 2) = (1 - sin(phi)) / (1 + sin(phi))

Coulomb Active Earth Pressure Formulation

Coulomb theory considers a rigid sliding wedge bounded by the back face of the wall and an internal planar slip failure plane. It accounts for wall-soil interface friction (delta), wall stem batter angle (theta from vertical), and backfill slope inclination (beta):

K_a = cos²(phi - theta) / [ cos²(theta) · cos(theta + delta) · [ 1 + sqrt( (sin(phi + delta) · sin(phi - beta)) / (cos(theta + delta) · cos(theta - beta)) ) ]² ]

3. Surcharge Pressures and Groundwater Hydrostatic Thrust

Real-world retaining walls rarely support dry soil in isolation. Designs must account for surface surcharges and groundwater forces:

• Uniform Surface Surcharge (q): A uniform live load (e.g., highway traffic or construction equipment) increases lateral horizontal stress uniformly over the entire wall height: sigma_h,s = Ka · q. The resultant surcharge force is P_s = Ka · q · H, acting at mid-height (H / 2).

• AASHTO Equivalent Soil Surcharge (h_eq): AASHTO LRFD Table 3.11.6.4-1 permits modeling standard highway live loads (HL-93) as an equivalent height of soil (h_eq typically 0.60 to 0.75 m for walls 4.0 to 6.0 m high).

• Groundwater & Buoyancy: If backfill drainage is compromised, pore water pressure acts with an at-rest hydrostatic coefficient of Kw = 1.0. Total lateral thrust equals effective soil thrust (using buoyant unit weight gamma prime = gamma_sat - gamma_w) plus full triangular hydrostatic water pressure (P_w = 0.5 · gamma_w · h_w²). Poor drainage frequently doubles the total overturning thrust, which is why AASHTO mandates granular backfill and functioning perforated weep holes.

4. External Stability Failure Modes per AASHTO LRFD (10th Edition, 2024)

Under AASHTO LRFD Bridge Design Specifications (10th Edition, 2024, Section 11), an earth-retaining gravity or cantilever wall must be verified against three external geotechnical limit states:

1. Overturning Stability: Resisting moments about the footing toe (M_R) generated by wall and soil self-weight must exceed driving overturning moments (M_ot) generated by lateral soil and surcharge thrust. In classical serviceability/ASD checks, the factor of safety must satisfy: FS_ot = M_R / M_ot >= 2.00.

2. Sliding Stability: The available horizontal friction resistance along the base (R_sl = sum(V) · tan(delta_b)) plus any validated passive key resistance must exceed driving horizontal thrust: FS_sl = R_sl / P_ah >= 1.50.

3. Resultant Eccentricity Limit (AASHTO Article 11.6.3.4): To prevent foundation edge uplift and ensure compressive contact across the subgrade, the eccentricity of the resultant force must remain within the middle-third of the base width on soil foundations:

e = (B / 2) - [ (M_R - M_ot) / sum(V) ] <= B / 6

CE Toolbox: Geotechnical & Structural Suite

ce-toolbox

Explore live shallow foundation bearing capacity, concrete volume, and structural beam/column calculators in CE Toolbox.

Engineering Tools Directory

tools-dir

Browse published Civil, Mechanical, and Textile browser-based engineering calculators on EngiVanta.

5. End-to-End Design Benchmark: Cantilever Retaining Wall Stability Analysis

To establish an absolute calculation benchmark, evaluate a reinforced concrete cantilever retaining wall supporting an industrial highway embankment.

Design Geometry and Material Inputs

• Total Wall Height: H = 5.00 m

• Footing Base Width: B = 3.20 m

• Footing Slab Thickness: t_f = 0.50 m; Stem Height: h_w = 4.50 m

• Stem Thickness: t_w = 0.40 m (vertical stem, theta = 0°)

• Toe Projection: B_toe = 0.90 m; Heel Projection: B_heel = 1.90 m

• Unit Weight of Reinforced Concrete: gamma_c = 24.00 kN/m³

• Cohesionless Granular Backfill: gamma = 18.50 kN/m³, phi = 32.00°, c = 0 kPa

• Backfill Surface Slope: beta = 0° (horizontal)

• Wall-Backfill Friction Angle: delta = (2/3)·phi = 21.33°

• Foundation Subgrade Soil: gamma_f = 19.00 kN/m³, phi_f = 30.00°, c_f = 0 kPa

• Base-Subgrade Friction Angle: delta_b = (2/3)·phi_f = 20.00°

• Traffic Surcharge: Uniform q = 12.00 kPa

• Drainage: Free-draining backfill with perforated pipe drainage (dry backfill model)

Step-by-Step Lateral Force & Stability Evaluation

Step 1: Compute Lateral Active Earth Pressure Coefficients

• Rankine Active Coefficient: K_a = tan²(45° - 16°) = tan²(29°) = 0.3073

• Comparative Rankine Active Thrust: P_a,Rankine = (0.5 · 0.3073 · 18.50 · 25.00) + (0.3073 · 12.00 · 5.00) = 71.06 + 18.44 = 89.50 kN/m (acting horizontally at delta = 0°)

• Coulomb Active Coefficient (for beta=0, theta=0, phi=32°, delta=21.33°):

Numerator = cos²(32°) = (0.84805)² = 0.71919

Denominator = cos(21.33°) · [ 1 + sqrt( (sin(53.33°)·sin(32°)) / cos(21.33°) ) ]²

sqrt term = sqrt( (0.80212 · 0.52992) / 0.93148 ) = sqrt(0.45631) = 0.67551

Denominator = 0.93148 · (1 + 0.67551)² = 0.93148 · 2.80733 = 2.61500

Coulomb K_a = 0.71919 / 2.61500 = 0.2750

Step 2: Determine Driving Lateral Thrust (Coulomb Method)

• Granular soil thrust: P_soil = 0.5 · K_a · gamma · H² = 0.5 · 0.2750 · 18.50 · (5.00)² = 63.59 kN/m (acting at H/3 = 1.667 m)

• Surcharge thrust: P_s = K_a · q · H = 0.2750 · 12.00 · 5.00 = 16.50 kN/m (acting at H/2 = 2.500 m)

• Total active thrust: P_a = 63.59 + 16.50 = 80.09 kN/m (inclined at delta = 21.33°)

• Horizontal driving component: P_ah = 80.09 · cos(21.33°) = 74.60 kN/m

• Vertical stabilizing component: P_av = 80.09 · sin(21.33°) = 29.13 kN/m (applied along heel back face x = 3.20 m)

• Total Driving Overturning Moment about Toe (M_ot):

M_ot = (63.59 · cos(21.33°) · 1.667 m) + (16.50 · cos(21.33°) · 2.500 m)

M_ot = (59.23 · 1.667) + (15.37 · 2.500) = 98.74 + 38.42 = 137.16 kNm/m

Step 3: Calculate Vertical Gravity Loads & Resisting Moments about Toe

• Concrete Stem (0.40 m x 4.50 m x 24.0 kN/m³): W_1 = 43.20 kN/m; arm x_1 = 0.90 + 0.20 = 1.10 m ==> M_1 = 47.52 kNm/m

• Concrete Footing (3.20 m x 0.50 m x 24.0 kN/m³): W_2 = 38.40 kN/m; arm x_2 = 1.60 m ==> M_2 = 61.44 kNm/m

• Soil Block above Heel (1.90 m x 4.50 m x 18.5 kN/m³): W_3 = 158.18 kN/m; arm x_3 = 0.90 + 0.40 + 0.95 = 2.25 m ==> M_3 = 355.91 kNm/m

• Surcharge on Heel (12.0 kPa x 1.90 m): W_s = 22.80 kN/m; arm x_s = 2.25 m ==> M_s = 51.30 kNm/m

• Vertical component of soil thrust: P_av = 29.13 kN/m; arm x_av = 3.20 m ==> M_av = 93.22 kNm/m

• Total Vertical Load: sum(V) = 43.20 + 38.40 + 158.18 + 22.80 + 29.13 = 291.71 kN/m

• Total Resisting Moment: M_R = 47.52 + 61.44 + 355.91 + 51.30 + 93.22 = 609.39 kNm/m

Step 4: Verify Factor of Safety Against Overturning (Preliminary Trial B = 3.20 m)

FS_ot = M_R / M_ot = 609.39 / 137.16 = 4.44 >= 2.00 [PASS: Overturning stability fully satisfied in trial geometry]

Step 5: Sliding Stability Evaluation — ASD Screening vs. AASHTO LRFD Strength I

Design offices evaluate sliding stability using two complementary frameworks: preliminary Allowable Stress Design (ASD) screening and statutory Limit States (LRFD):

• Trial Geometry ASD Check (B = 3.20 m, Base Friction Only):

- Base friction resistance: R_sl = sum(V) · tan(delta_b) = 291.71 · tan(20.00°) = 106.18 kN/m

- Driving horizontal thrust: P_ah = 74.60 kN/m

- ASD Sliding Factor of Safety: FS_sl = R_sl / P_ah = 106.18 / 74.60 = 1.423 ≈ 1.42

- Preliminary Acceptance Criterion: Traditional geotechnical screening requires FS_sl >= 1.50 for sustained static earth and surcharge loads (e.g., USACE EM 1110-2-2502, NAVFAC DM 7.02). The trial value of 1.42 is below 1.50, demonstrating that relying solely on smooth base friction on a 3.20 m footprint is insufficient.

• AASHTO LRFD Strength I Limit State Verification (Article 10.6.3.4 & Table 10.5.5.2.2-1):

- Factored horizontal driving force: H_u = gamma_EH · P_ah,soil + gamma_LS · P_ah,surch = 1.50 · 59.23 + 1.75 · 15.37 = 88.85 + 26.90 = 115.75 kN/m

- Factored vertical load (using minimum load factors to conservatively minimize friction: gamma_DC,min = 0.90, gamma_EV,min = 1.00, gamma_LS = 0.00 since transient traffic surcharge cannot be relied upon to resist sliding):

V_u = 0.90 · (43.20 + 38.40) + 1.00 · 158.18 + 1.00 · 29.13 = 73.44 + 158.18 + 29.13 = 260.75 kN/m

- Factored nominal base resistance (resistance factor phi_s = 1.00 for CIP concrete on soil):

R_r = phi_s · V_u · tan(delta_b) = 1.00 · 260.75 · tan(20.00°) = 94.90 kN/m

- Capacity-to-Demand Ratio: CDR = R_r / H_u = 94.90 / 115.75 = 0.820 < 1.00 (confirms that preliminary trial section requires design remediation).

Step 6: Engineering Remediation & Final Verified Compliant Design

To achieve complete code compliance, two standard engineering modifications are evaluated:

• Demonstrated Primary Solution — Footing Base Widening to B = 3.50 m:

Extend the footing heel projection by 0.30 m (B_heel = 2.20 m, total B = 3.50 m):

- Additional concrete slab weight (0.30 m x 0.50 m x 24.0 kN/m³): Delta_W2 = +3.60 kN/m (lever arm x = 1.75 m)

- Additional soil block over heel (0.30 m x 4.50 m x 18.5 kN/m³): Delta_W3 = +24.98 kN/m (lever arm x = 2.40 m)

- Additional surcharge on extended heel (12.0 kPa x 0.30 m): Delta_Ws = +3.60 kN/m (lever arm x = 2.40 m)

- Revised Total Vertical Load: sum(V)_rev = 291.71 + 3.60 + 24.98 + 3.60 = 323.89 kN/m

- Revised Resisting Moment: M_R,rev = 609.39 + (3.60 · 1.75) + (24.98 · 2.40) + (3.60 · 2.40) = 609.39 + 6.30 + 59.95 + 8.64 = 684.28 kNm/m

- Corrected ASD Sliding Factor of Safety:

R_sl,rev = sum(V)_rev · tan(delta_b) = 323.89 · tan(20.00°) = 117.88 kN/m

FS_sl,rev = R_sl,rev / P_ah = 117.88 / 74.60 = 1.580 >= 1.50 [PASS: Full Sliding Compliance Achieved]

- Corrected ASD Overturning Factor of Safety:

FS_ot,rev = M_R,rev / M_ot = 684.28 / 137.16 = 4.989 ≈ 4.99 >= 2.00 [PASS: Overturning Fully Satisfied]

- Corrected Resultant Location & Eccentricity (AASHTO Article 11.6.3.4):

x_bar,rev = (M_R,rev - M_ot) / sum(V)_rev = (684.28 - 137.16) / 323.89 = 547.12 / 323.89 = 1.689 m from toe

Base Centerline: B / 2 = 3.50 / 2 = 1.750 m

Resultant Eccentricity: e = |1.750 - 1.689| = 0.061 m

AASHTO Middle-Third Limit: B / 6 = 3.50 / 6 = 0.583 m

Check: e = 0.061 m <= 0.583 m [PASS: Resultant comfortably inside middle-third; 100% compressive base contact].

• Alternative Remediation — Concrete Shear Key Design (for constrained B = 3.20 m):

If property boundaries prevent footing widening, cast a 0.40 m wide x 0.40 m deep concrete shear key beneath the stem (depth from 0.50 m to 0.90 m below grade):

- Rankine passive earth pressure coefficient: K_p = tan²(45° + 15°) = 3.00

- Effective vertical stress at top of key: sigma_v1 = 19.00 kN/m³ · 0.50 m = 9.50 kPa

- Effective vertical stress at bottom of key: sigma_v2 = 19.00 kN/m³ · 0.90 m = 17.10 kPa

- Average passive resistance along key: sigma_p,avg = 3.00 · [ (9.50 + 17.10) / 2 ] = 3.00 · 13.30 = 39.90 kPa

- Total nominal passive force mobilized: P_p,key = 39.90 kPa · 0.40 m = 15.96 kN/m

- Combined Sliding Resistance with Key: R_sl,key = 106.18 + 15.96 = 122.14 kN/m

- Corrected Sliding Factor of Safety: FS_sl = 122.14 / 74.60 = 1.637 >= 1.50 [PASS: Shear Key Solution Fully Verified].

6. Practical Engineering Caveats: Drainage Failures & Soil CPT Verification

Engineers must never treat theoretical lateral earth pressure equations as absolute without verifying drainage integrity:

• Weep Hole Clogging: The single most common cause of retaining wall collapse globally is hydrostatic pressure buildup caused by clogged weep holes or absent geotextile filter fabric. If backfill becomes fully saturated, the lateral thrust increases by over 100%, causing instant sliding or overturning.

• Soil Friction Angle Overestimation: Assuming phi = 35° or 36° for uncompacted or silty backfill produces unconservative Ka values. AASHTO LRFD specifies conservative default granular values (phi = 30° to 32°) unless verified by consolidated-drained triaxial testing.

Frequently Asked Questions

Coulomb theory accounts for friction along the rough concrete wall interface (delta > 0). This friction tilts the resultant thrust downward at an angle delta, which reduces the horizontal component of lateral force and introduces a beneficial downward vertical force (Pav) that stabilizes the wall against overturning and sliding.

Standard Citations & Technical References

NI

Md. Nur Islam

Founder of EngiVanta

Founder of EngiVanta. Directing platform architecture, numerical calculation standards, and engineering publications across civil and mechanical domains.